V-Neck Cotton Jersey Top
Introducing a versatile women's sewing pattern for a classic V-neck jersey top, featuring a meticulously constructed V-neck band and comfortable short sleeves.
When To Wear
This comfortable V-neck top is ideal for everyday wear, making it a versatile choice for:
- Casual Outings: Perfect for relaxed daily activities when paired with jeans, shorts, or casual skirts.
- Work & Office: a polished base layer under blazers or cardigans, suitable for a business-casual environment.
- Layering: An essential piece for layering under jackets or over tailored skirts for transitional weather or added warmth.
Key Design Features
Silhouette: a fitted bodice that gently skims the body, offering a comfortable yet shapely fit.
Neckline: a defined V-neckline finished with a clean, shaped neckband for a polished and comfortable fit.
Sleeves: Short, set-in sleeves designed for ease of movement and classic appeal.
Back: Features a center back seam for subtle shaping and a refined finish.
Hem: a straight bottom hem, allowing for versatile styling whether tucked in or worn untucked.
Length: Designed to fall at the high hip, making it suitable for pairing with both trousers and skirts.
Level Of Difficulty
Intermediate. Requires accurate seam allowance management, precise V-neckband attachment, handling knit fabrics, and neat double-needle hemming.
Fabric Recommendations
Choose lightweight knit fabrics with good recovery to achieve the intended fit and drape:
- Cotton jersey
- Viscose jersey
- Lightweight interlock knits
- Other thin knit fabrics with stretch
Additional Supplies
- Lightweight fusible knit interfacing (to reinforce the outer neckband piece and a small scrap for the V-point)
Cutter's Must
- From main fabric:
- 1. Front - 1 qty on fold
- 2. Back - 2 qty
- 3. Sleeve - 2 qty
- 4. Neckline trim strip - 2 qty on fold
- From fusible interfacing: Interface only the outer of the neckline trim strip.
Sewing Instructions
- Press the fusible interfacing to the outer of the trim strip made of knit fabric (Heat-activated interfacings are pressed to the wrong side of the piece with a hot iron).
- Stitch the center back seam and side seams. Press seam allowances open.
- Stitch the sleeve seams. Press the hem seam allowances of the sleeves to the wrong side and topstitch at a distance of 2 cm with a twin needle.
- Set the sleeves into the open armholes. In the upper parts of the armholes, press the seam allowances towards the front and back.
- Fold the outer and inner parts of the neckline trim strip in half, right sides together, pin and stitch the back center edges. Press seam allowances open.
- Place both trim strip parts right sides together and pin the neckline edges. Stitch. Trim seam allowances close to the stitching line, make notches at curves and along the center front line towards the stitching.
- Turn the trim strip right side out. Baste and press the edge, baste the open edges.
- To prevent the front corner from fraying, press a small piece of interfacing to the wrong side of the front over the marked stitching line of the trim strip attachment.
- Pin the trim strip to the neckline from the center front line to the center back seam, aligning the marked stitching lines of the trim strip attachment and the cross notches. The outer trim strip lies on the right side of the garment.
- Stitch the trim strip, making a backstitch at the beginning and end of the seam. Make a notch on the front allowance along the center front line to the last stitch.
- Then pin and stitch the second half of the trim strip to the neckline from the center front line to the center back seam. Make a backstitch at the beginning and end of the seam.
- Overlock the trim strip attachment seam allowances together and press towards the front, back, and sleeves.
- Press the hem seam allowance of the blouse to the wrong side and topstitch at a distance of 2 cm with a twin needle.
