Pattern

CUTTER'S MUST

• From main fabric:
1. FRONT SKIRT HALF - 1 QTY on fold
2. BACK SKIRT HALF - 2 QTY
3. Waistband - 1 QTY
• From LINING fabric:
1. FRONT SKIRT HALF - 1 QTY on fold
2. BACK SKIRT HALF - 2 QTY
• From FUSIBLE INTERFACING: waistband.

Sewing Instructions

1. Reinforce the waistband with FUSIBLE INTERFACING (Fusible interfacings are ironed onto the wrong side of the piece with a strongly heated iron).
2. Stitch the center back seam between the slit NOTCHES. Press the edges of the slits to the wrong side.
3. Stitch the ZIPPER under the edges of the upper slit so that the teeth are not visible.
4. Stitch the darts and side seams.
5. On the LINING, stitch the darts and seams. Place the LINING into the skirt, wrong side to wrong side, and baste to the upper edge of the skirt. Sew the fastener allowance to the ZIPPER tapes.
6. Fold the waistband right sides together with the upper edge of the skirt and stitch, leaving an allowance for the fastener protruding on the right back edge of the waistband. Finish the ends of the waistband. Turn under the inner edges of the waistband and topstitch from the right side into the attachment seam. On the left end of the waistband, make a buttonhole; on the right, sew on a button.
7. Hem the skirt. Sew the slit allowances to the bottom hem. At the bottom of the LINING, make a hem so that the LINING is 2 cm shorter than the skirt. Turn under the LINING and sew it to the slit allowances.