Minerva Digital Pattern 5916

Introducing a digital pattern for the sculpted coat with framed pockets and pleated peplum – Modern Uniformity Meets Structured Elegance.

Please note: I visualized this design in Clo3d without the belt as per my personal preference.

WHEN TO WEAR DESIGN 5916

This coat is a sculptural reimagining of classic tailoring, combining clean lines, sharp contrast, and precise construction. The double collar, framed pockets, and rear pleated peplum create an ensemble that blends statement detail with practical refinement. Ideal for structured daywear or formal occasions when presence matters.

• Creative Business Settings or Gallery Openings: Polished and directional without being overworked.

• Fall/Winter Events: The structured silhouette and full lining offer warmth and poise.

• Elegant Daywear: Pairs beautifully with tall boots and gloves for a bold, composed look.

KEY DESIGN FEATURES

Silhouette: Straight-cut coat with raglan sleeves integrated into sculpted yoke seams for smooth lines and clean construction.

Collar: Layered double collar—an outer stand collar over an inner base—designed for visual contrast and sharp tailoring.

Back: Defined by a pleated peplum at the waist, adding volume and structured elegance to the rear silhouette.

Pockets: Patch pockets with vertical contrast frames and decorative button accents.

Closure: Simple front fastening (no placket) for a minimal, uninterrupted front panel.

Interior: Fully lined throughout for a refined finish and comfortable wear.

LEVEL OF DIFFICULTY

Intermediate to advanced. Precision is required when aligning the yokes, constructing the layered collar, and shaping the pleated peplum.

SEAM ALLOWANCES

No seam allowances by default. If an option to add them at 1 EUR is chosen, all seams are 1 cm. Hem allowance for garment and sleeve – 3.5 cm.

Please note:

• A single contour on the pattern pieces means no seam allowances are included.

• A double contour indicates seam allowances are included.

FABRIC RECOMMENDATIONS FOR A DIGITAL PATTERN 5916

Use fabrics with crisp structure and minimal stretch to support the pleats and structured collar:

• Denim

• Coated cotton drill

• Canvas or cotton twill

• Structured jacquard

• For collar lining and pocket frames: metallic satin, faux leather, or high-shine woven

ADDITIONAL SUPPLIES

• Fusible interfacing (collars, facings, pocket frames)

• Full lining

• Soft raglan shoulder pads (blouse-weight)

• 7 decorative buttons (2.5–3.5 cm)

• 8 smaller buttons (1–1.3 cm)

• Buckle, 5 cm wide (optional, if a belt is added)

CUTTER’S MUST FOR DIGITAL PATTERN 5916

From Main Fabric:

Back yoke – 2 pieces

Front yoke – 2 pieces

Side back – 2 pieces

Center back – 2 pieces

Lower back – 2 pieces

Side front – 2 pieces

Center front – 2 pieces

Stand collar – 2 pieces

Outer collar – 2 pieces

Collar – 2 pieces

Back neckline facing – 1 piece

Front facing – 2 pieces

Waistband/belt – 1 piece

Pocket front – 2 pieces

Pocket side – 2 pieces

Pocket frame – 2 pieces

Peplum – 1 piece on fold

Belt loop – 1 piece

From Lining Fabric:

Back yoke – 2 pieces

Front yoke – 2 pieces

Side back – 2 pieces

Center back – 2 pieces

Lower back – 2 pieces

Side front – 2 pieces

Center front – 2 pieces

Peplum – 1 piece on fold

Pocket lining – 2 pieces

From Fusible Interfacing:

Front facing – 2 pieces

Back neckline facing – 1 piece

Stand collar – 1 piece

Collar – 1 piece

Outer collar – 1 piece

Note: Lining pieces for front and back should be cut using the main garment pieces with facings subtracted.

IMPORTANT INFORMATION

Before cutting your fabric:

• Print out the pattern and lay out the pieces according to your fabric width (90 cm to 150 cm) to calculate the required yardage.
• Don’t forget to mirror and pair symmetrical pieces.
• Use notches to match seams precisely. All notches and markings are placed on the right side of each pattern piece for clarity.

DIGITAL PATTERN 5916 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS

• DXF AAMA Format: Compatible with 3D fashion design software for virtual fitting and drape simulation.

• PLT Format: Plotter-ready for sewing contractors.

• PDF Format: Print-at-home for experienced sewists.

CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES

Pattern 5916 offers both custom sizing based on individual measurements and ASTM US standard sizing.

• Bust: 35 cm to 170 cm

• Low Hip: 35 cm to 190 cm

The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, waist, and sleeve length—minimizing alterations and enhancing comfort.

CHECK OUT ANOTHER DIGITAL PATTERN FOR A COAT