Pattern 2801

Minerva Digital Pattern 2801 – Stand Collar Coat

Introducing a digital pattern for the tailored coat with stand collar and decorative fastening – Sleek Modern Outerwear with Refined Detailing.

WHEN TO WEAR DESIGN 2801

This coat is a versatile outer layer that balances elegance and practicality, making it ideal for:

• City Wear: A polished look for professional or casual urban outings.
• Transitional Seasons: Lightweight coat fabrics provide coverage without bulk.
• Special Occasions: The stand collar and decorative buckle closure add a sophisticated edge.

KEY DESIGN FEATURES

Silhouette: Straight tailored coat with clean lines for a streamlined fit.

Collar & Neckline: High stand collar composed of two parts, adding structure and modern refinement.

Closure: Decorative front fastening with buckle detail, supported by a button for security.

Sleeves: Full-length two-piece sleeves with clean shaping.

Pockets: Jetted pockets with welts (листочка) for a polished finish.

Back: Center-back seam with smooth contouring for a tailored silhouette.

Lining: Fully lined for comfort and durability.

LEVEL OF DIFFICULTY

Advanced. Precision is required for welt pocket construction, stand collar shaping, and setting the full lining.

SEAM ALLOWANCES

No seam allowances by default. If the option to add them at €1 is chosen, all seams are 1 cm. Hem allowances: coat hem – 3 cm; sleeve hem – 3 cm.

Please note: A single contour on the pattern pieces means no seam allowances are included. A double contour indicates seam allowances are included.

FABRIC RECOMMENDATIONS FOR DIGITAL PATTERN 2801

Choose lightweight coat or suiting fabrics in natural or blended fibers:

• Wool flannel or lightweight melton
• Worsted or twill suiting fabrics
• Cotton or viscose blends for transitional wear

ADDITIONAL SUPPLIES

• Fusible interfacing – for front facings, collar, and pocket welts
• Decorative fastening with buckle
• One button

CUTTER’S MUST FOR DIGITAL PATTERN 2801

From Main Fabric:

1. Back – 1 piece on fold
2. Front – 2 pieces
3. Sleeves – 2 pieces
4. Front Facings – 2 pieces
5. Back Neck Facing – 1 piece
6. Stand Collar – 2 pieces
7. Pocket Welts – 2 pieces

From Lining Fabric:

1. Front Lining – 2 pieces
2. Back Lining – 1 piece on fold
3. Sleeve Lining – 2 pieces
4. Large Pocket Bag – 2 pieces
5. Small Pocket Bag – 2 pieces

From Fusible Interfacing:

1. Front Facings – 2 pieces
2. Back Neck Facing – 1 piece
3. Stand Collar – 1 piece

IMPORTANT INFORMATION

Before cutting your fabric, print and lay out the paper patterns according to your fabric width (90–150 cm) to determine yardage. Remember to include paired and symmetrical pieces. Pay close attention to notches – they must align precisely during assembly.

DIGITAL PATTERN 2801 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS

DXF AAMA – For 3D designers, fully compatible with most 3D fashion software.

PLT – For contractors, enabling precise cutting layouts.

PDF – Print-at-home format for advanced sewists.

CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES

Pattern 2801 offers both custom sizing based on individual measurements and ASTM US standard sizing:

• Bust/Chest: 35 cm to 170 cm
• Low Hip: 35 cm to 190 cm

The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, waist, and sleeve length—minimizing alterations and enhancing comfort.

CHECK OUT ANOTHER SEWING PATTERN – DIGITAL PATTERN 2115