Minerva Trench Coat Sewing Pattern 6030 – Double-Breasted Trench with Storm Flap, Raglan Sleeves, Belt, and Back Vent
Introducing a digital sewing pattern for the classic double-breasted trench coat with functional storm flaps, raglan sleeves, and a detachable belt – Timeless Outerwear with Structured Utility.
WHEN TO WEAR DESIGN 6030
This trench coat brings together practicality and elegance, making it suitable for:
- Urban Wear: A staple for transitional weather, offering protection from wind and light rain.
- Professional & Casual Settings: Perfect layered over tailoring or everyday outfits.
- Costume and Film Wardrobe: Ideal for historical, detective-style, or military-inspired looks.
KEY DESIGN FEATURES
Silhouette: Relaxed, straight fit with structured shoulders and belt to define the waist.
Front: Classic double-breasted closure with six buttons and wide notched lapels.
Collar & Lapels: Traditional trench collar with collar stand.
Storm Flap: Single front storm flap and rear back yoke flap.
Sleeves: Full-length raglan sleeves with sleeve straps and buckle adjusters.
Pockets: Slanted welt pockets with buttoned flaps.
Back: Center-back vent
Belt & Straps: Detachable waist belt with buckle
Topstitching: Visible topstitching throughout for reinforcement and classic trench styling.
LEVEL OF DIFFICULTY
Advanced. Tailoring experience recommended — includes welt pockets, collar with stand, storm flaps, lined vent, raglan sleeve insertion, and precise topstitching.
SEAM ALLOWANCES
No seam allowances by default. If the option to add them at €1 is selected, pattern will come with seam included.
Please note:
- Single contour → no seam allowances included.
- Double contour → seam allowances included.
FABRIC RECOMMENDATIONS FOR TRENCH COAT SEWING PATTERN 6030
Choose structured outerwear fabrics that provide drape and weather resistance:
- Cotton gabardine, twill, drill, raincoat fabric
- Lightweight wool coatings or treated cotton
- Lining: Plaid or solid viscose, satin, or polyester lining fabric
ADDITIONAL SUPPLIES
- Fusible interfacing – for front facings, collar, collar stand, pocket flaps, sleeve straps, belt, and vent tab
- Lining fabric
- 9 large buttons (approx. 25 mm)
- 7 medium buttons (approx. 15 mm)
- 4 small buttons (approx. 12 mm)
- 2 rectangular buckles for sleeve straps
- 1 buckle for waist belt
- 14 metal eyelets
CUTTER’S MUST FOR TRENCH COAT SEWING PATTERN 6030
From Main Fabric:
- Back – 2 pieces
- Front – 2 pieces
- Back Yoke (Back Storm Flap) – 1 piece on fold
- Front Yoke (Front Storm Flap) – 2 pieces
- Front Sleeve (Raglan) – 2 pieces
- Back Sleeve (Raglan) – 2 pieces
- Upper Collar – 1 piece
- Under Collar – 1 piece
- Collar Stand – 2 pieces
- Pocket Flaps – 4 pieces
- Back Vent Insert – 1 piece on fold
- Vent Tab (button tab for vent) – 2 pieces
- Waist Belt – 1 piece on fold
- Sleeve Decorative Straps – 2 pieces
- Center Front Facing – 2 pieces
- Back Yoke Bottom Facing (marked on Back Yoke) – 1 piece
- Pocket Bag – 2 pieces
- Pocket Welt Facing (20 × 6 cm rectangle) – 2 pieces
- Belt Loops (for main belt) – 1 piece (36 × 6 cm rectangle)
- Sleeve Strap Loop – 1 piece
For drafting the Lining pattern pieces, use the following modifications:
- Back lining: use the back piece combined with the yoke, without the back vent facing (vent underlay piece).
- Front lining: use the front piece without the front facing (placket facing) section.
- Sleeves and pocket bags are used without modification.
- Shorten the lining length by 2 cm at the hem.
Interfacing Should Be Applied To:
- Front facings
- Pocket flaps
- Upper and under collar
- Collar stand
- Half-width of sleeve straps
- Waist belt
- Outer piece of Front Yoke
- Outer piece of back vent tab
IMPORTANT INFORMATION
Before cutting:
- Print and position all pattern pieces on your fabric width (90–150 cm) to determine yardage.
- Account for mirrored and symmetrical pieces.
- Mark grainlines, pocket placements, belt loops, vent fold, button/hole positions.
TRENCH COAT PATTERN 6030 FOR 3D DESIGNERS, CONTRACTORS & ADVANCED SEWISTS
Available formats:
- DXF AAMA – for 3D clothing simulation and CAD systems
- PLT – for precision plotting and industrial cutting
- PDF – print-at-home or large-format printing
CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES
Trench coat pattern 6030 offers both custom sizing based on individual measurements and ASTM US standard sizing:
- Bust: 35 cm to 170 cm
- Low Hip: 35 cm to 190 cm
The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, bust, and sleeve length—minimizing alterations and enhancing comfort.
