Tailcoat Pattern 6074 – Two-Button Tailcoat with Notched Lapel, Cutaway Front, Chest Welt Pocket, Sleeve Vents & Center Back Vent
Introducing tailcoat pattern for the refined two-button tailcoat with sweeping cutaway front and dramatic back tails – Classic Formalwear with Contemporary Precision.
WHEN TO WEAR DESIGN 6074
This tailcoat is designed for occasions where elegance and structure are essential:
- Formal Events: Ideal for weddings, evening receptions, and black-tie gatherings.
- Stage & Performance: Perfect for conductors, musicians, and performers wanting formal flair and dramatic movement.
- Ceremonial & Uniform Wear: Suitable for traditional dress codes, ceremonial attire, or costume tailoring.
KEY DESIGN FEATURES
Silhouette: Tailored body with defined waist and elongated rounded tails.
Front: Hook & Eye closure with two decorative buttons at the waist with sharply cut away front opening.
Lapels: Notched lapels with clean edge finishing and classic tailoring lines.
Chest Pocket: Welt chest pocket on the left front for traditional detailing.
Back: Side body seams with waist seam transitioning into long curved tails and finished with a center-back vent.
Sleeves: Full-length two-piece sleeves with sleeve vents.
LEVEL OF DIFFICULTY
Advanced. This garment requires experience in structured tailoring, precise seam alignment, interfacing techniques, and shaping curved cutaway fronts and tails.
SEAM ALLOWANCES
No seam allowances by default. If the option to add them at €1 is chosen, pattern will come with seam allowances included.
Please note: A single contour on the pattern pieces means no seam allowances are included. A double contour indicates seam allowances are included.
FABRIC RECOMMENDATIONS FOR TAILCOAT PATTERN 6074
Choose structured, stable woven fabrics that hold sharp seams and formal shaping:
- Wool suiting, melton, barathea, or cavalry twill
- Heavy gabardine, brocade, or velvet for evening use
Lining: Satin, viscose, or acetate for a refined interior finish
ADDITIONAL SUPPLIES
- Fusible interfacing or hair canvas for lapels, fronts, collar, and chest welt pocket
- Shoulder pads and sleeve heads for enhanced structure
- 2 buttons
- Hook & Eye
- Lining fabric
CUTTER’S MUST FOR TAILCOAT PATTERN 6074
From Main Fabric:
- Back – 2 pieces
- Side Back – 2 pieces
- Front – 2 pieces
- Side – 2 pieces
- Tail – 2 pieces
- Center Front Facing – 2 pieces
- Collar – 2 pieces
- Upper Sleeve – 2 pieces
- Lower Sleeve – 2 pieces
- Chest Pocket Welt (marked on pattern as “Off-set Welt”) – 1 piece
- Upper Pocket Bag – 1 piece
From Lining Fabric:
For drafting the lining pattern pieces, use the following modifications:
- Back lining – use Back pattern, add a 2 cm ease pleat at center back, exclude vent extension, cut 2.
- Front lining – use Front pattern, exclude center front facing area, cut 2.
- Side Back lining – use Side Back pattern without any modifications, cut 2.
- Side – use Side pattern without any modifications, cut 2.
- Tail – use Tail pattern without any modifications, cut 2.
- Upper Sleeve – use Upper Sleeve pattern, exclude vent extension, cut 2.
- Lower Sleeve – use Lower Sleeve pattern, exclude vent extension, cut 2.
- Upper Pocket Bag – use Upper Pocket Bag pattern, cut 1.
- Shorten both body and sleeve lining by 2 cm at hem.
From Fusible Interfacing:
For drafting fusible interfacing patterns, use the following patterns without any modifications:
- Front – cut 2.
- Center Front Facing – cut 2.
- Collar – cut 2.
- Chest Pocket Welt – cut 1.
IMPORTANT INFORMATION
Before cutting your fabric, print and lay out all pattern pieces according to your fabric width (90–150 cm) to determine accurate yardage. Remember to include mirrored and symmetrical parts. Tailoring methods such as pad stitching, shaping the roll line, and careful pressing are essential for achieving a professional finish.
TAILCOAT PATTERN 6074 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS
DXF AAMA – For 3D designers using fashion CAD software
PLT – For contractors needing precise cutting layouts
PDF – Print-at-home pages for advanced sewists
CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES
Pattern 6074 is available as a standard-size pattern or fully customized using individual body measurements:
- Chest: 35 cm to 170 cm
- Low Hip: 35 cm to 190 cm
The drafting software tailors the pattern to your specific dimensions, ensuring accurate fit at the shoulders, waist, and sleeve length—reducing alterations and enhancing comfort.
CHECK OUT TAILCOAT PATTERN 6081 FOR AN ALTERNATIVE TAILCOAT DESIGN
