Men’s Sewing Pattern 6057 – Zip-Front Jacket with Stand Collar and Patch Pocket
Introducing a men’s sewing pattern for a straight-cut zip-front jacket featuring a clean stand collar, elasticated hem, and practical patch pocket — Lightweight Utility with Functional Simplicity.
WHEN TO WEAR DESIGN 6057
This jacket is designed for comfort and practicality, making it an ideal choice for:
- Everyday City Wear: A lightweight outer layer suitable for daily activities and casual use.
- Active & Casual Outfits: Works well with jeans or casual trousers for an easy, functional look.
- Seasonal Transitions: Designed for mid-weight fabrics that protect against wind without adding bulk.
KEY DESIGN FEATURES
Silhouette: Straight-cut, hip-length jacket with a relaxed fit and elasticated hem for comfort and ease of movement.
Collar: Stand collar providing a clean neckline and minimal, modern appearance.
Closure: Central front closure with a separating zipper.
Sleeves: Two-piece set-in sleeves finished with cuffs for a neat and practical finish.
Pockets: Single chest patch pocket with flap and snap closure.
Back: Back yoke combined with a one-piece lower back for simple construction and comfort.
LEVEL OF DIFFICULTY
Intermediate. Careful construction is required for zipper insertion, collar assembly, sleeve setting, and accurate alignment of panels.
SEAM ALLOWANCES
No seam allowances by default. If the option to add them at €1 is chosen, the pattern will come with seam allowances included.
Please note:
- A single contour on the pattern pieces means no seam allowances are included.
- A double contour indicates seam allowances are included.
FABRIC RECOMMENDATIONS FOR MEN’S SEWING PATTERN 6057
Choose durable, medium-weight fabrics that hold structure while remaining comfortable:
- Dense cotton fabrics such as denim
- Outerwear or raincoat fabrics
- Nylon shantung or similar technical fabrics
- Other woven fabrics with moderate body
ADDITIONAL SUPPLIES
- Main fabric, width 150 cm
- Fusible interfacing
- Elastic tape for hem finishing
- 4 snap fasteners
- 1 separating zipper for front closure
CUTTER’S MUST FOR MEN’S SEWING PATTERN 6057
From Main Fabric:
- Flap – 2 pieces
- Patch Pocket – 1 piece
- Collar – 1 piece
- Back Yoke – 1 piece
- Lower Back – 1 piece
- Front – 2 pieces
- Center Front Facing – 2 pieces
- Lower Sleeve – 2 pieces
- Upper Sleeve – 2 pieces
- Cuff – 2 pieces
From Fusible Interfacing:
All interfacing pieces are cut using the corresponding main pattern pieces.
- Flap
- Collar
- Center Front Facing
- Cuffs
IMPORTANT INFORMATION
Before cutting your fabric, print and lay out the paper patterns according to your fabric width (90–150 cm) to determine required yardage.
When sewing, carefully match all notches and zipper placement — they must correspond precisely to ensure correct construction and fit.
MEN’S SEWING PATTERN 6057 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS
DXF AAMA – Fully compatible with most 3D fashion software.
PLT – Suitable for professional cutting and production layouts.
PDF – Print-at-home format for experienced sewists.
CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES
Pattern 6057 offers both custom sizing and ASTM US standard sizing:
- Bust/Chest: 35 cm to 170 cm
- Low Hip: 35 cm to 190 cm
The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, chest, and sleeve length—minimizing alterations and enhancing comfort.
CHECKOUT PANT’S SEWING PATTERN 6004
