Pattern 2845

Minerva Digital Pattern 2845 – Blouse with Draped Overlay Detail

Introducing a digital pattern for the softly tailored blouse with statement draped overlay – Feminine Elegance with Contemporary Flair.

WHEN TO WEAR DESIGN 2845

This blouse balances graceful movement with tailored finishing, making it perfect for:

• Office & Business Casual: The clean lines and soft drape make it an elevated choice for professional wear.
• Evening Outings: The overlay detail and bow-style tie offer a chic, feminine touch for dinners and events.
• Day-to-Night Styling: Pair with tailored trousers for work, then add a skirt or heels to transition seamlessly.

KEY DESIGN FEATURES

Silhouette: Semi-fitted blouse with front overlay drape that flows into a soft tie.

Neckline: Rounded neckline with a detachable overlay detail secured at center front with a stitched tab.

Sleeves: Short puffed sleeves with gentle gathers at the crown.

Back: Center-back seam with invisible zipper closure for a clean finish.

Overlay Detail: Two-piece draped panel falling from neckline, adding volume and decorative asymmetry.

LEVEL OF DIFFICULTY

Intermediate. Care is required to assemble and finish the overlay detail neatly, attach the neckline facings, and install the invisible zipper.

SEAM ALLOWANCES

No seam allowances by default. If the option to add them at €1 is chosen, all seams are 1 cm. Hem allowances: blouse hem – 2 cm; sleeve hem – 2 cm; overlay outer edge – 2 cm.

Please note: A single contour on the pattern pieces means no seam allowances are included. A double contour indicates seam allowances are included.

FABRIC RECOMMENDATIONS FOR DIGITAL PATTERN 2845

Blouse-weight fabrics in natural or blended fibers with soft drape:

• Silk crepe, viscose challis, or lightweight satin
• Cotton voile or fine poplin
• Polyester blends with fluid hand

ADDITIONAL SUPPLIES

• Fusible interfacing – for neckline facings and front tab
• Invisible zipper – for back closure

CUTTER’S MUST FOR DIGITAL PATTERN 2845

From Main Fabric:

1. Back – 2 pieces
2. Front – 1 piece on fold
3. Overlay detail – 2 pieces
4. Front neckline facing – 1 piece
5. Back neckline facing – 2 pieces
6. Sleeve – 2 pieces
7. Front tab – 1 piece

From Fusible Interfacing:

1. Front neckline facing – 1 piece
2. Back neckline facing – 2 pieces

IMPORTANT INFORMATION

Before cutting your fabric, print and lay out the paper patterns according to your fabric width (90–150 cm) to determine yardage. Remember to include paired and symmetrical pieces.

Pay attention to notches during construction—they must align correctly. Markings on the pattern pieces are shown from the right side.

DIGITAL PATTERN 2845 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS

DXF AAMA – For 3D designers, fully compatible with most 3D fashion software.

PLT – For contractors, enabling precise cutting layouts.

PDF – Print-at-home format for advanced sewists.

CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES

Pattern 2845 offers both custom sizing based on individual measurements and ASTM US standard sizing:

• Bust: 35 cm to 170 cm
• Low Hip: 35 cm to 190 cm

The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, bust, and sleeve length—minimizing alterations and enhancing comfort.

CHECK OUT ANOTHER PATTERN – DIGITAL PATTERN 4186