Minerva Digital Pattern 2805 – Summer Jacket with Cuffs and Tabs
Introducing a digital pattern for the lightweight open-front jacket with cuffed sleeves and decorative tabs – Relaxed Elegance with Everyday Versatility.
WHEN TO WEAR DESIGN 2805
This jacket is an ideal layering piece for:
- Summer Evenings: Light tailoring adds polish without weight.
- Office & City Wear: Relaxed silhouette pairs effortlessly with dresses, skirts, or trousers.
- Travel & Casual Outings: A versatile jacket with simple details that transition easily between settings.
KEY DESIGN FEATURES
Silhouette: Straight, easy-fitting jacket with gentle shaping for comfort and movement.
Neckline & Front: Clean neckline with front facings and open draped edges, designed for layering.
Sleeves: Three-quarter length sleeves with cuffs and decorative tabs secured by buttons.
Back: Back yoke detail with smooth lower back panel for structure and drape.
Finish: Mid-hip length with faced front and hem for a neat tailored edge.
LEVEL OF DIFFICULTY
Beginner to Intermediate. Straightforward construction, with attention required for sewing the cuffs and attaching decorative tabs neatly.
SEAM ALLOWANCES
No seam allowances by default. If the option to add them at €1 is chosen, all seams are 1 cm. Hem allowances: Jacket hem – 2.5 cm; sleeve cuff hem – 2.5 cm.
Please note: A single contour on the pattern pieces means no seam allowances are included. A double contour indicates seam allowances are included.
FABRIC RECOMMENDATIONS FOR DIGITAL PATTERN 2805
Lightweight suiting or shirting fabrics in natural or blended fibers:
- Cotton, linen, or viscose suitings
- Lightweight gabardine or twill
- Soft blends with polyester or rayon for easy care
ADDITIONAL SUPPLIES
- Fusible interfacing – for facings, cuffs, and back neckline facing
- Two buttons – for sleeve tabs
CUTTER’S MUST FOR DIGITAL PATTERN 2805
From Main Fabric:
- Back – 1 piece on fold
- Back Yoke – 1 piece
- Front – 2 pieces
- Sleeve – 2 pieces
- Cuff – 2 pieces
- Front Facing – 2 pieces
- Back Neck Facing – 1 piece
- Sleeve Tab – 2 pieces
From Fusible Interfacing:
- Cuff – 2 pieces
- Front Facing – 2 pieces
- Back Neck Facing – 1 piece
IMPORTANT INFORMATION
Before cutting your fabric, print and lay out the paper patterns according to your fabric width (90–150 cm) to determine yardage. Remember to include paired and symmetrical pieces. Match notches carefully to ensure correct assembly.
DIGITAL PATTERN 2805 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS
DXF AAMA – For 3D designers, fully compatible with most 3D fashion software.
PLT – For contractors, enabling precise cutting layouts.
PDF – Print-at-home format for advanced sewists.
CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES
Pattern 2805 offers both custom sizing based on individual measurements and ASTM US standard sizing:
- Bust/Chest: 35 cm to 170 cm
- Low Hip: 35 cm to 190 cm
The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, bust, and sleeve length—minimizing alterations and enhancing comfort.
CHECK OUT ANOTHER SEWING PATTERN – DIGITAL PATTERN 2630
