Minerva Digital Pattern 2802 – Shawl Collar Vest with Peplum
Introducing a digital pattern for the sleeveless tailored vest with shawl collar and flared peplum – Feminine Tailoring with Modern Elegance.
WHEN TO WEAR DESIGN 2802
This vest combines sharp tailoring with a soft feminine silhouette, making it perfect for:
- Business Wear: Layer over blouses or dresses for a polished professional look.
- Evening Outfits: The shawl collar and shaped waist elevate simple trousers or skirts.
- Special Occasions: A chic alternative to a jacket, styled with statement accessories.
KEY DESIGN FEATURES
Silhouette: Fitted sleeveless vest with princess seams for shaping and a flared peplum at the hem.
Collar: Classic shawl collar extending into the front facings for a refined tailored frame.
Closure: Three-button single-breasted front fastening.
Back: Panelled back with shaped seams and flared lower section.
Finish: Waist seam construction emphasizes structure and balance between bodice and peplum.
LEVEL OF DIFFICULTY
Intermediate. Suitable for sewists with some tailoring experience. Care is needed when constructing the shawl collar, setting facings, and attaching the peplum panels.
SEAM ALLOWANCES
No seam allowances by default. If the option to add them at €1 is chosen, all seams are 1 cm. Hem allowance: 2 cm.
Please note: A single contour on the pattern pieces means no seam allowances are included. A double contour indicates seam allowances are included.
FABRIC RECOMMENDATIONS FOR DIGITAL PATTERN 2802
Choose medium-weight dress or suiting fabrics in natural or blended fibers:
- Cotton sateen, linen, or viscose blends
- Lightweight wool suiting or gabardine
- Blended fabrics with polyester or rayon for structure and durability
ADDITIONAL SUPPLIES
- Fusible interfacing – for facings and back neckline facing
- Three buttons – for front closure
CUTTER’S MUST FOR DIGITAL PATTERN 2802
From Main Fabric:
- Upper Center Back – 2 pieces
- Upper Side Back – 2 pieces
- Lower Back – 1 piece on fold
- Upper Center Front – 2 pieces
- Upper Side Front – 2 pieces
- Lower Front – 2 pieces
- Front Facing – 2 pieces
- Back Neck Facing – 1 piece
From Fusible Interfacing:
- Front Facing – 2 pieces
- Back Neck Facing – 1 piece
IMPORTANT INFORMATION
Before cutting your fabric, print and lay out the paper patterns according to your fabric width (90–150 cm) to determine yardage. Remember to include paired and symmetrical pieces. Pay close attention to balance marks and notches to ensure precise alignment.
DIGITAL PATTERN 2802 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS
DXF AAMA – For 3D designers, fully compatible with most 3D fashion software.
PLT – For contractors, enabling precise cutting layouts.
PDF – Print-at-home format for advanced sewists.
CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES
Pattern 2802 offers both custom sizing based on individual measurements and ASTM US standard sizing:
- Bust: 35 cm to 170 cm
- Low Hip: 35 cm to 190 cm
The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, waist, and hem—minimizing alterations and enhancing comfort.
CHECK OUT ANOTHER SEWING PATTERN – DIGITAL PATTERN 5933
