Minerva Digital Pattern 2806 – Pleated-Hem Vest with Diagonal Closure
Introducing a digital pattern for the tailored sleeveless vest with asymmetric wrap front and pleated peplum – Sharp Structure with a Playful Edge.
WHEN TO WEAR DESIGN 2806
This vest balances menswear precision with feminine detail, making it perfect for:
- Workday Statement: Layer over a fitted blouse and trousers for a polished office look.
- Evening Out: Pair with slim pants or a pencil skirt for a structured alternative to a jacket.
- Seasonless Styling: Wear solo in warm weather or layer under a coat when it’s cold.
KEY DESIGN FEATURES
Silhouette: Fitted waist-length vest with angled double-breasted closure and pleated lower panel.
Front: Overlapping wrap front with four-button closure and one internal button for a secure fit. Single welt pocket on the left side for a tailored accent.
Back: Princess seams with integrated waistband and wide inverted pleats for added volume and movement.
Neckline: Deep V-front with clean, collarless finish.
LEVEL OF DIFFICULTY
Intermediate to Advanced. Precision is required when forming the pleats, sewing the welt pocket, and aligning the asymmetric closure.
SEAM ALLOWANCES
No seam allowances by default. If the option to add them at €1 is chosen, all seams are 1 cm. Hem allowance: vest hem – 2 cm.
Please note:
- A single contour on the pattern pieces means no seam allowances are included.
- A double contour indicates seam allowances are included.
FABRIC RECOMMENDATIONS FOR DIGITAL PATTERN 2806
Medium- to heavy-weight dress or suiting fabrics in natural or blended fibers for crisp pleats and stable shaping:
- Wool suiting or tropical wool
- Cotton sateen or twill
- Linen blend with body
- Medium-weight crepe for a softer drape
ADDITIONAL SUPPLIES
- Fusible interfacing – for facings, waistband, and welt pocket
- Four main buttons and one inside button for closure
CUTTER’S MUST FOR DIGITAL PATTERN 2806
From Main Fabric:
- Upper Back Center – 2 pieces
- Upper Back Side – 2 pieces
- Back Waistband – 1 piece
- Lower Back – 1 piece
- Front Right Center – 1 piece
- Front Right Side – 1 piece
- Front Left Center – 1 piece
- Front Left Side – 1 piece
- Front Waistband – 1 piece
- Lower Front Pleated Panel – 1 piece
- Back Neck Facing – 1 piece
- Front Facings – 2 pieces
- Welt – 1 piece
From Fusible Interfacing:
- Back Neck Facing – 1 piece
- Front Facings – 2 pieces
- Welt – 1 piece
IMPORTANT INFORMATION
Before cutting your fabric, print and lay out the paper patterns according to your fabric width (90–150 cm) to determine yardage. Include paired and symmetrical pieces. Match all notches carefully when assembling pleats and the wrap front for precise alignment.
DIGITAL PATTERN 2806 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS
DXF AAMA – For 3D designers, fully compatible with most 3D fashion software.
PLT – For contractors, enabling precise cutting layouts.
PDF – Print-at-home format for advanced sewists.
CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES
Pattern 2806 offers both custom sizing based on individual measurements and ASTM US standard sizing:
- Bust: 35 cm to 170 cm
- Low Hip: 35 cm to 190 cm
The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, bust, and waist—minimizing alterations and enhancing comfort.
CHECK OUT ANOTHER PATTERN – DIGITAL PATTERN 4327
